The best-selling products in the category

  • Chain extender charm in the shape of a drop with a colored surface treatment measuring 7 x 2.5 mm and an eyelet for a thread with a diameter of 1.2 mm. The end charm is used as a decorative end of extension chains.
THE PRICE IS FOR 1 PIECE.
    Zinc Alloy Chain Extender Charm - Drop - 7 x 2.5 mm, Hole: 1.2 mm
    Chain extender charm in the shape of a drop with a colored surface treatment measuring 7 x 2.5 mm and an eyelet for a thread with a diameter of 1.2 mm. The end charm is used as a decorative end of extension chains. THE PRICE IS FOR 1 PIECE.
    $0.01
    In stock
  • Callote is made of 304 stainless steel with a length of 7 mm, a diameter of 5 mm and a hole for a thread with a thread with a diameter of 1 mm. It is used as a simple and elegant ending to bracelets or necklaces strung on wires or nylon or nylon lines.
THE PRICE IS FOR 1 PCS.
    304 Stainless Steel Calotte Ends - 5 x 7 mm, Hole: 1 mm
    Callote is made of 304 stainless steel with a length of 7 mm, a diameter of 5 mm and a hole for a thread with a thread with a diameter of 1 mm. It is used as a simple and elegant ending to bracelets or necklaces strung on wires or nylon or nylon...
    $0.07
    In stock
  • Iron cord ends for strap up to 3.5 mm wide. The tip has dimensions of 9 mm in height, 3.5 mm in width and 4 mm in depth. The eye of the terminal has a thread with a diameter of 2 mm. Terminals are sold in pairs (ie in two pieces).
THE PRICE IS FOR 2 PCS (1 pair).
    Iron Cord Ends - for 3.5 mm wide Cord (2 pcs)
    Iron cord ends for strap up to 3.5 mm wide. The tip has dimensions of 9 mm in height, 3.5 mm in width and 4 mm in depth. The eye of the terminal has a thread with a diameter of 2 mm. Terminals are sold in pairs (ie in two pieces). THE PRICE IS...
    $0.02
    In stock
  • Iron cord ends end for cord up to 3 mm wide. The tip has dimensions of 6 mm in height, 3 mm in width and 2.3 mm in depth. The eye of the terminal has a thread with a diameter of 1.2 mm. Terminals are sold in pairs (ie in two pieces).
THE PRICE IS FOR 2 PCS (1 pair).
    Iron Cord Ends - for Cord Width 3 mm (2 pcs)
    Iron cord ends end for cord up to 3 mm wide. The tip has dimensions of 6 mm in height, 3 mm in width and 2.3 mm in depth. The eye of the terminal has a thread with a diameter of 1.2 mm. Terminals are sold in pairs (ie in two pieces). THE PRICE IS...
    $0.01
    In stock
  • Iron caps with a colored finish measuring 8 x 4 mm.
THE PRICE IS FOR 1 PCS.
    Iron dome - 8 x 4 mm
    Iron caps with a colored finish measuring 8 x 4 mm. THE PRICE IS FOR 1 PCS.
    $0.02
    In stock
  • Iron ribbon crimp ends for necklaces made of organza or satin ribbons with a width of 35 mm. The end piece itself has dimensions of 35 x 8 x 5 mm and also has an eyelet for a thread with a diameter of 1 mm to add an extension chain or other decoration that will fulfill the decorative character. The iron core has a color finish in the shade of the selected color combination.
THE PRICE IS FOR 1 PCS.
    Iron Ribbon Crimp Ends - for 35 mm wide Ribbon
    Iron ribbon crimp ends for necklaces made of organza or satin ribbons with a width of 35 mm. The end piece itself has dimensions of 35 x 8 x 5 mm and also has an eyelet for a thread with a diameter of 1 mm to add an extension chain or other...
    $0.10
    In stock
  • Plastic cord ends made of acrylic (more precisely made of ABS - Acrylonitrile-Butadiene-Styrene thermoplastic copolymer) in the shape of a bell with an inner diameter of 4 mm. The cord end has dimensions of 9.5 x 5.5 mm and an eyelet for a thread with a diameter of 1.8 mm. Cord ends made of ABS plastic are very tough and strong and also resistant to pressure shocks and low temperatures. The UV plating of the cord ends guarantees them better scratch resistance and is also an environmentally friendly method - it does not require chemical solvents, so there is no need to dispose of hazardous waste, as with other cheaper or non-ecological methods of plating.
THE PRICE IS FOR 1 PCS.
    Plastic Cord End with UV plating - Cylinder with Indentationd - 9.5 x 5.5 mm - inner Ø 4 mm
    Plastic cord ends made of acrylic (more precisely made of ABS - Acrylonitrile-Butadiene-Styrene thermoplastic copolymer) in the shape of a bell with an inner diameter of 4 mm. The cord end has dimensions of 9.5 x 5.5 mm and an eyelet for a thread...
    $0.10
    In stock
  • Wire guardian designed for aesthetic finishing of jewelry strung on wires, natural and synthetic cords or fibers. The end piece has dimensions of 4.5 x 4 x 1 mm and is designed for sleeves up to 0.5 mm in diameter.
THE PRICE IS FOR 2 PCS (1 pair).
    Brass Wire Guardian - for String up to Ø 0.5 mm (2 pcs)
    Wire guardian designed for aesthetic finishing of jewelry strung on wires, natural and synthetic cords or fibers. The end piece has dimensions of 4.5 x 4 x 1 mm and is designed for sleeves up to 0.5 mm in diameter. THE PRICE IS FOR 2 PCS (1 pair).
    $0.09
    In stock
  • Callote is made of 316 stainless steel with a length of 8.5 mm, a diameter of 4 mm and a hole for a thread with a thread with a diameter of 2 mm. It is used as a simple and elegant ending to bracelets or necklaces strung on wires or nylon or nylon lines.
THE PRICE IS FOR 1 PCS.
    316 Stainless Steel Calotte Ends - 4 x 8.5 mm, Hole: 2 mm
    Callote is made of 316 stainless steel with a length of 8.5 mm, a diameter of 4 mm and a hole for a thread with a thread with a diameter of 2 mm. It is used as a simple and elegant ending to bracelets or necklaces strung on wires or nylon or nylon...
    $0.06
    In stock
  • Plastic cord ends made of acrylic (more precisely made of ABS - Acrylonitrile-Butadiene-Styrene thermoplastic copolymer) in the shape of a cylinder with an inner diameter of 6 mm. The cord end has dimensions of 14 x 8 mm and an eyelet for a thread with a diameter of 1.6 mm. Cord ends made of ABS plastic are very tough and strong and also resistant to pressure shocks and low temperatures. The UV plating of the cord ends guarantees them better scratch resistance and is also an environmentally friendly method - it does not require chemical solvents, so there is no need to dispose of hazardous waste, as with other cheaper or non-ecological methods of plating.
THE PRICE IS FOR 1 PCS.
    Plastic Cord End with UV plating - Cylinder with Indentationd - 14 x 8 mm - inner Ø 6 mm
    Plastic cord ends made of acrylic (more precisely made of ABS - Acrylonitrile-Butadiene-Styrene thermoplastic copolymer) in the shape of a cylinder with an inner diameter of 6 mm. The cord end has dimensions of 14 x 8 mm and an eyelet for a thread...
    $0.13
    In stock
See more Hide more



304 Stainless Steel Cord Coil Terminators - for Cord with a Diameter of 2 mm (2 pcs)
$0.17

favorite

You must be logged
Cord coil terminators made of stainless (or surgical) steel type 304 for cord up to 2 mm in diameter. The tip is 8.5 mm long and has a diameter of 4 mm. The inner diameter of the terminator and the diameter of the eyelet for the thread is 2 mm. They are sold in pairs (ie in two pieces).
THE MENTIONED PRICE IS FOR 1 PCS.
In stock: 178 pcs/g
Buy
Crimp end - for ribbon width 15 mm
  • plating
Iron Ribbon Crimp Ends - Half Circle - for Ribbon width 15 mm
$0.10

favorite

You must be logged
Iron ribbon crimp end for necklaces made of organza or satin ribbons with a width of 15 mm. The end piece itself measures 15 x 10 x 6.5 mm and also has an eyelet for a thread measuring 1.5 x 3 mm to add an extension chain or other decoration that will fulfill a decorative character. The iron core has a color finish in the shade of the selected color combination.
THE PRICE IS FOR 1 PCS.
In stock: 126 pcs/g
Details
Crimp end - for ribbon width 15 mm
  • plating
Iron Ribbon Crimp Ends - Half Circle - for Ribbon width 20 mm
$0.20

favorite

You must be logged
Iron Ribbon Crimp for necklaces made of organza or satin ribbons with a width of 20 mm. The end piece itself has dimensions of 20 x 12 x 7 mm and also has an eyelet for a thread measuring 1.5 x 3 mm to add an extension chain or other decoration that will fulfill a decorative character. The iron core has a color finish in the shade of the selected color combination.
THE PRICE IS FOR 1 PCS.
In stock: 125 pcs/g
Buy
316 Stainless Steel Fold Over Crimp - for Strap Width 3 mm (2 pcs)
$0.29

favorite

You must be logged
Fold Over Crimp made of stainless (or surgical) steel type 316 for strap up to 3 mm wide. The tip has dimensions of 10 mm in height, 4.5 mm in width and 4 mm in depth. The internal dimension of the terminal is 3 x 5 mm. The eye of the terminal has a hole for thread with a diameter of 2 mm. Crimps are sold in pairs (ie in two pieces).
THE PRICE IS FOR 2 PCS (1 pair).
In stock: 66 pcs/g
Buy
304 Stainless Steel Ribbon Crimp Ends - for Ribbon Width 13 mm
$0.30

favorite

You must be logged
Ribbon crimp end made of stainless (or surgical) steel type 304 for necklaces made of organza or satin ribbons with a width of 13 mm. The end piece itself has dimensions of 13 x 7.5 x 6 mm and also has an eyelet for a 3 x 1 mm thread to add an extension chain or other decoration that will fulfill its decorative character.
THE PRICE IS FOR 1 PCS.
In stock: 57 pcs/g
Details
304 Stainless Steel Ribbon Crimp Ends - for 6 mm Wide Ribbon
$0.21

favorite

You must be logged
Ribbon crimp ends made of stainless (or surgical) steel type 304 for necklaces made of organza or satin ribbons with a width of 6 mm. The end piece itself has dimensions of 6.5 x 6 x 4 mm and also has an eyelet for a thread measuring 2.5 x 1.5 mm to add an extension chain or other decoration that will fulfill a decorative character.
THE PRICE IS FOR 1 PCS.
In stock: 37 pcs/g
Buy
304 Stainless Steel Ribbon Crimp Ends - for Ribbon Width 10 mm
$0.25

favorite

You must be logged
Ribbon crimp ends made of stainless (or surgical) steel type 304 for necklaces made of organza or satin ribbons with a width of 10 mm. The end piece itself has dimensions of 10.5 x 9.5 x 6 mm and also has an eyelet for a 3 x 2 mm thread to add an extension chain or other decoration that will fulfill a decorative character.
THE PRICE IS FOR 1 PCS.
In stock: 24 pcs/g
Details